Comet Kart Sales - Comet Eagle Low Cost Kart, Economy Kart Racing Chassis

Comet Eagle 30/32mm Racing Kart

The origin of the Eagle chassis started with a need for an affordable but competitive sprint kart that the average entry level karter can afford. Unfortunately there is usually a compromise between a quality chassis and an affordable chassis. With the Eagle we wanted to change that!

Since the most important part of any kart is the frame we have made no compromise in it's quality and construction. You can always upgrade bolt on components but short of a tube bender, a blow torch and a welder you can't change the frame! So what makes the Eagle frame special? The tubing. The Eagle is made out of 30mm and 32mm tubing imported from Europe. The tubing is purchased from the exact same mills that the major European Manufacturers buy their tubing from. It does matter! You can buy off the shelf tubing but it is not the right stuff to build a competitive race kart. We buy the tubing in bulk, have it ocean freighted to the USA where it is cut, bent, coped and TIG welded right here in Indianapolis. We also powder coat the kart locally.

The kart is then assembled in house here at Comet using components sourced from US suppliers and machine shops as well as select European parts suppliers. The Eagle is available in a basic model with 1 1/4" axle or can be upgraded to a 40mm or 50mm axle. The amount of upgrades are extensive including seat, steering wheel, wheels, axle, hubs, spindle shaft diameter and bodywork.

The Eagle is designed to run with an inboard drive engine like a Clone or Animal engine or can be run outboard with a Yamaha, KPV or TaG Engine. The Eagle is designed to be very versatile.

Standard Kart Includes -

Imported 30mm and 32mm Chromoly Tubing
TIG Welded

American Made MCP Brakes with Oversized Flat Brake Disk

Angled Aluminum Steering Hub for Better Driver Ergonomics

17mm Front Spindles, Predrilled for Safety Pin with Two Tie Rod Ackerman Holes

10mm Kingpin Bolt with Adjustable Offset Pill

Black Fiberglass Seat

Aluminum Floor Tray

Douglas Spun Aluminum Wheels

Three Position Adjustable Rear Ride Height with Unique Bearing Cassette Design

Front Adjustable Ride Height with self centering washers

Billett Aluminum Throttle and Brake Pedals

Quick Release Fuel Tank, available in 3.5 or 8.5 liter

Your choice of KG CIK Bodywork including EVO, Unico or Buru, Many Colors Available, Plastic Rear Bumper Optional Upgrade

KG Suede Wrapped Padded Round Steering Wheel Available in Three Colors

Removable Front Torsion Bar and Clamps Available, Sold Separate

Tubing is cut, coped, welded, painted and the frame assembled in the USA!

Eagle Rolling chassis with Douglas Wheels, Black Fiberglass Seat, 1 1/4" Axle Assembly, KG Bodywork, Fuel Tank, Front and Rear Wheel Hubs $2450.00, Tires Sold Separately

Ton of Upgrades Available, Call for Pricing

Eagle shown with Optional Sticker Kit and Accessories

Eagle shown with 1 1/4" Axle and Optional Tires

Overview of optional rear 40mm rear axle assembly

Close up of rear bearing cassette and optional 40mm axle

Eagle Spindle with Multiple Ackerman Holes and Offset Camber/Caster Pill

Angled Steering Hub and Standard KG Round Steering Wheel

Eagle shown with Clone Engine and Other Optional Equipment

Due to the amount of options available with a new chassis, we ask that you please Call Us to order your new chassis. We feel this is the best way to properly inform you of the best options available!
Call Us Today to Order!!